The Origen V2 Genesis Rebuildable Atomizer is here at long last!
Improving in every way on the genesis-style atomizer, the Origen V2 can utilize a variety of build styles ranging from traditional mech wicks and even cotton! The stylish top cap is held in place by two O-rings which are hidden inside, the AFC ring is held in place by screwing the upper part of the top cap which has the high efficiency cooling fins so you don't burn your lips when you vape!
The high efficiency cooling fins aren’t only design elements, it is necessary to dissipate the heat much faster. The polycarbonate tank (stainless steel tank will be sold separately) is fine-threaded, sealed by two o-rings, and it is secured by a threaded stainless steel ring. Take care when disassembling and reassembling the tank section, and do it only when it is absolutely necessary! Do not over-tighten!
- Diameter: 22mm
- Height: 34.5mm (without 510 connector and drip tip)
- Weight: 35g
- Capacity: roughly 4 ml
- Airflow control: 1.2mm – 1.5mm – 2.0mm - 2.5mm for dual or single coil, and 2x1.2mm stacked for single coil use only
- Capacity: 4ml
- Two pairs of "dedicated" wick holes
- One pair for cotton/silica with 4.5mm on the one side
- One pair for mesh with 3mm on the opposite side