Mark Bugs Charm RDA
Charm has a truly unique, special design that uses the top cap for dispersion of heat making it adaptable from a dripper to a bottom feeder. It features a 510 connection with an interchangeable silver-plated center pin (one for dripping, one for bottom feeding.) THere are dual air channels milled directly into the base that feed air directly underneath the coils. AFC is provided by a three-slotted ring which can be positioned to use the Charm in dual- or single-coil mode that is all held together by a single o-ring.
The posts on the Charm atomizer are sturdy and thick, designed to reduce the vapor chamber and allow thick 3mm screws that can be easily adjusted with a flathead screwdriver. In fact, the negative post is milled directly into the base itself! The posts' holes will accommodate wire up to a maximum of 2.5mm in diameter, and to top it all off, the Charm features PEEK insulation for solid builds every time.
- 37mm w/Delrin Adapter Drip Tip
- 41mm w/Regular Drip Tip
- Heat Dispersed via Top Cap
- Unique, Thick-Walled Posts for Easy Building